1993 Power door locks

Discussion in 'General Motoring' started by bennett, Apr 21, 2005.

  1. bennett

    bennett Guest

    Still having problem with door locks- they growl and sputter , I changed
    all actuators with Bone yard units, they worked fine when I installed,
    couple days later they start chatering again. Any Ideas??
     
    bennett, Apr 21, 2005
    #1
  2. bennett

    parts Guest

    Is your driver door lock cylinder completely straight up and down when
    you remove the key?
     
    parts, Apr 23, 2005
    #2
  3. bennett

    Mike Guest

    Very good point. This also happens to my daughters car. The lock cylinder is
    worn to the point that the key can be withdrawn after unlocking/locking
    without having the key completely vertical. This allows the electric
    lock/unlock signal for the opposite door to remain activated.

    The simple solution is to be careful when taking out the key to always make
    sure it is vertical. The more expensive solution is to buy an whole new lock
    set and keys and replace them all.
     
    Mike, Apr 23, 2005
    #3
  4. bennett

    bennett Guest

    I will check the key position- could be , looks like all Saturns have this
    ignition issue.
    Thanks
     
    bennett, Apr 27, 2005
    #4
Ask a Question

Want to reply to this thread or ask your own question?

You'll need to choose a username for the site, which only take a couple of moments (here). After that, you can post your question and our members will help you out.
Similar Threads

  1. VUE Auto door locks

  2. 02 sl2 door locks

  3. Power Locks for a 1999 SL

  4. Help - Power Door Locks

  5. 1993 Saturn Power door locks

  6. Power locks problem '96 SL1

  7. '95 sw2 power locks

Loading...