Powe Window Problem

Discussion in 'General Motoring' started by Skid, Jun 20, 2004.

  1. Skid

    Skid Guest

    Hello,

    I'm having a problem with the driver's power window in my 95SL2. When out
    yesterday, and went to close the window, and it did not move. Shut the
    engine off, and switched to accessory, and it still did not move, but the
    other windows still worked. Looked for a fuse, but did not find any. Started
    the car up, and the window closed. Opened the window about half way again,
    and it again, stopped moving. I know it is getting power, as the RPM drops a
    bit when it change the switch, I pulled up on the window as I engaged the
    switch, and it was able to continue, and I pulled my hand out before it was
    crushed. :) So I think the window is binding. What is the fix for this
    problem? Would this be too difficult to do myself?

    Thanks so much.
     
    Skid, Jun 20, 2004
    #1
Ask a Question

Want to reply to this thread or ask your own question?

You'll need to choose a username for the site, which only take a couple of moments (here). After that, you can post your question and our members will help you out.
Similar Threads

  1. Power window

  2. 95 power window motors

  3. Window problem again

  4. SW2 - Leaking Rear Window

  5. '93 SL1 Window/Door Problem

  6. VUE squeaky window seals

  7. Window Tint Problem

  8. window motor problem

Loading...